Replacement auger tube bushing for the pushrod & shaft. Auger Parts Compatible with Most Traeger Grills.
Replacement Part Models
- BRN109
- KIT0021
Compatible with Traeger Models
- Bronson 20, Century
- Deluxe Elite 300
- Double Commercial
- Eastwood 22, Eastwood 34
- Executive, Heartland
- Homestead 520
- Junior Elite 20
- Large Commercial
- Lil Tex Limited Edition, Lil' Pig
- Lil Tex Elite 22
- Lonestar 20, Lonestar
- Longhorn Steer
- Mesa 22, Pro 20
- Pro Series 22, Pro Series 34
- Professional
- Renegade Elite 20, Renegade Pro
- Ridgeland, Roll Top
- Select Elite, Select Pro
- Silverton
- Tailgater 20
- Texas Elite 34, Texas Elite
- Texas Limited Edition, Texas
- Texas Pro
- XL
NOTE: Please verify fitment with your specific model and size.Include one Bushing Only (screws are not included).
Width | Outer Diameter | Inner Diameter | Warranty |
1"(25mm) | 1.49"(37.9mm) | 0.53"(13.7mm) | 120 Day |
Product Guides and Documents
HOW TO REMOVE THE AUGER:
- Turn the Switch OFF (o) and disconnect the Power Cord until the Grill is cool.
- Remove the controller and hopper.
- Remove the screw holding the auger in place (turn it counter-clockwise and slide it out.).Grip the bottom with a wrench or socket to hold it still while you screw it out.
- We suggest that using an ash vacuum to clean all Pellets or ashes from the burn pot without pilling the grill apart.
- Then you can replace or clean the Auger. Putting everything back together is as simple as doing the steps in reverse order.
Tips: If you have an auger jam it will need a strong turn clockwise and a tough pull. Don't be scared to put your back into it.